Related Manuals for Hitachi Koki WR 16SA
Summary of Contents for Hitachi Koki WR 16SA
- Page 1 Impact Wrench WR 16SA HANDLING INSTRUCTIONS Read through carefully and understand these instructions before use.
- Page 2 M16 × 55 (F10T) (kg-m) 12mm...
- Page 3 Pin O-Ring type Hex. socket Ring Anvil Plunger type Hole Plunger Spring Switch Rating Tightening time Tightening torque Wear limit No. of carbon brush Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use.
- Page 5 •...
- Page 6 21.5 32.5...
-
Page 9: General Power Tool Safety Warnings
Carrying power tools with your finger on the switch GENERAL POWER TOOL SAFETY WARNINGS or energising power tools that have the switch on invites accidents. WARNING d) Remove any adjusting key or wrench before Read all safety warnings and all instructions. turning the power tool on. -
Page 10: Specifications
5. Use a step up transformer when a long extension PRECAUTIONS ON USING IMPACT WRENCH cable is used. 1. Hold power tool by insulated gripping surfaces, 6. Confirm the tightening torque by a torque wrench when performing an operation where the fastener before use in order to assertain the correct tightening may contact hidden wiring or its own cord. -
Page 11: Prior To Operation
2. Extension bar 5. Mounting the socket The extension bar is convenient for working in very (1) Pin, O-ring type (Fig. 1) restricted spaces or when the socket provided cannot Select a socket matched to the bolt to be tightened reach the bolt to be tightened. -
Page 12: Maintenance And Inspection
An excessively large tightening torque for a small MAINTENANCE AND INSPECTION bolt may strech or break the bolt. The tightening torque increases proportionally to the operating 1. Inspecting the socket time. Use the correct operating time for the bolt. A worn or deformed hex or a square-holed socket 4. - Page 16 Hitachi Koki Co., Ltd. Code No. C99136723 N Printed in Japan...
Need help?
Do you have a question about the WR 16SA and is the answer not in the manual?
Questions and answers