Table of Contents
Advertisement
while operating power tools may result in serious
personal injury.
- Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
- Prevent unintentional starting. Ensure the switch is in
the off-position before connecting the battery pack,
picking up or carrying the tool.
- A moving cutting attachment can cause severe injury.
Maintain proper control of the machine with both hands
until the cutting attachment has completely stopped
rotating.
- Replace any cutting attachment that has been
damaged.
attachment is installed correctly and securely fastened
before each use.
- Use only accessories recommended by manufacturer.
Non-recommended accessories can cause injuries and
accidents. Contact your dealer or our service agent.
- Always use the harness provided when operating the
tool.
- Do not expose the tool to rain and humidity.
- In case of abnormal vibrations, stop immediately to use
the tool and remove the battery; check if all screws are
firmly tighten, if the cutting mean are correctly
assembled. In case of doubt, bring the tool to our agent
service for inspection.
- Always start the tool safely, tools correctly and fully
assembled, foot and body far from the cutting means,
harness installed and used.
Always
make
sure
that
Safety
the
cutting
5
Advertisement
Table of Contents
