KEEWAY RK V125 C User Manual page 98

Note:
1. When you feel the tire pressure drops, check whether there are nails, small holes on the tire, and whether the side of the rim (rim) is
damaged. Tubeless tires will gradually deflate when they have small holes.
2. Incorrect tire pressure can cause abnormal tire tread wear and even cause safety accidents.
3. Insufficient tire pressure can cause tire damage or detachment from the rim.
Warning:
EN
1. The triangle mark indicates the location of the wear bar. If the wear bar touches the ground, the tire has worn to the limit. The tires must
be replaced.
2. When replacing tires, make sure that the size and model of replacement tires should conform to the contents of Table 3. If you change
the tires of a different size or model, it will affect the handling performance of the motorcycle and may cause the motorcycle to lose
control.
3. After repairing or replacing tires, balance the wheels. It is very important to balance the wheel correctly to avoid uneven contact
between the tire and the road, and to avoid uneven wear of the tire.
Danger:
1. Tubeless tires are sealed at the contact part between the rim and the bead. In order to avoid air leakage, removing and installing
tubeless tires requires special tools to protect the rim and bead part, and a special tire changer is used.
2. To repair the small holes of a tubeless tire, you need to remove the tire and apply a patch on the inside of the tire. Do not use external
repair methods, because the centrifugal force of the tire will loosen the repaired area when turning. The vehicle speed cannot exceed 80
kilometers per hour within 24 hours after the tire is repaired, and the vehicle speed cannot exceed 100 kilometers per hour in the future. If
you exceed the speed, the heat of the tire will increase sharply, which will make the repair failure and cause the tire to leak. If the side of
the tire is damaged, or the damaged area is greater than 6 mm, the tire cannot be repaired and used.
22