Inspection Before Driving - KEEWAY RK V125 C User Manual

Danger:
Poor tire running-in can cause tires to skid or lose control. When using new tires, you need to be especially careful. Run the tires in
within the first 160 kilometers (100 miles).
6. Overhaul during the running-in period: Please perform the vehicle overhaul after the new vehicle has been driven for 1,000 kilometers. During
the running-in period, other parts have been engaged. At this time, all parts should be adjusted well. Then change the oil.
Note:
EN
When the vehicle is in a bad condition, it needs to be overhauled before 1000 kilometers.

5.2. Inspection before driving

In order to ensure driving safety, please check the motorcycle carefully before using the motorcycle; if there is any abnormality during the
inspection, it must be repaired and solved before it can be used.
The inspection can follow the following procedures:
1. Check the lubricating oil in the engine (see page 33) and make sure that there is no leakage;
2. Check whether the fuel is sufficient;
3. Check whether the coolant in the cooling system is sufficient and ensure that there is no leakage;
4. Check the front and rear brakes: free travel (5-10mm front, 10-20mm rear), smooth operation;
5. Check the front and rear tires: the air pressure, the depth of wear of the tread pattern, and the cracks (see page 20);
6. Check the transmission belt: the elasticity is suitable, and there is no defect or damage;
7. Check the throttle handle: the free gap (2-6 mm), whether the oil refueling or oil return is easy to operate;
8. Check the lights and signal lights: make sure that the headlights, taillights, brake lights, turn signals, indicator lights, and horns are in good
condition;
9. Check the battery electrolyte and add distilled water in time (see page 48);
10. Check the steering device: it should be stable, flexible to rotate, without looseness and axial movement;
11. Check the clutch handle: free clearance (5-10mm), smooth operation;
24