Table of Contents
Advertisement
Optical Input
EN
Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical
Audio cable (included).
Connect the Digital Optical Audio cable to the optical output on the audio source
and to the Optical Input on the soundbar (Ref.12).
Press the POWER button on the side panel (Ref.4) or on the remote control
(Ref.18) to switch on the unit.
Press the INPUT button on the remote control repeatedly (Ref.23) to switch to
Optical mode or press the INPUT button (Ref.5) repeatedly on the soundbar to
select Optical mode. The mode indicator LED will turn yellow.
Using the native controls on your connected device, make sure the audio
settings are set to PCM or Optical Audio and are switched on.
Audio from the connected audio source will now be played through the speakers.
Optical cable
Rear view of TV unit
14
Advertisement
Table of Contents
