Using The Optical Input - MAJORITY Bowfell Instruction Manual

All manuals and user guides at all-guides.com
Instructions Guide
EN

Using the Optical Input

You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on the
audio source and to the Optical Input on the speaker bar (Ref.9).
Press the POWER/MODE button on side panel (Ref.4) or POWER button
directly on the remote control (Ref.11) to switch on the unit.
Press the OPTICAL button on the remote control repeatedly to switch
to Optical mode or press the POWER/MODE button on main unit (Ref.4)
repeatedly to select the Optical mode. The mode indicator LED will turn
ORANGE.
Using the native controls on your connected device, make sure the
audio settings are set to PCM or Optical Audio and are turned On.
Audio from the connected audio source will now be played through the
speakers.
OPTICAL IN
DC 12V
USB
OPTICAL cable
Rear view of the unit
9