Connecting To The Mains Supply; Using The Hdmi Input - MAJORITY Sierra Manual

Connecting to the Mains Supply

 Ensure that the power supply voltage is within the range of 110V -240V ~ 50Hz/60Hz. Any other
voltage may cause damage to the unit.
The Sierra comes with a power adapter for the soundbar. Make sure to unwind the cable to its full length.
Connect the plug to a mains socket by fully inserting the plug into the mains socket.
Connect the Adapter to the AC power port in the back of the soundbar (Back View Ref.6).
The Display Panel will show '–' to indicate it has registered a power source and is on standby mode.
Press the 'POWER' button on the remote control (Remote Control Ref.11) or press and hold the 'POWER'
button for 3 seconds on the top of the soundbar (Front and Top View Ref.2) to turn the unit on or off.
Using the RCA Audio Cable
 You will need a TV/audio source with RCA audio output sockets and an RCA to 3.5mm AUX
cable (included).
Connect the RCA stereo audio cable to your TV's stereo RCA (L/R) audio output sockets (for help on how to
locate your TV's audio output sockets, refer to your TV's user manual).
Connect the 3.5mm AUX end of the cable to the side of the soundbar via the AUX IN port (Back View Ref.10).
Press 'INPUT' on the remote control (Remote Control Ref.10) or on the unit (Front and Top View Ref.5) until
'AUX' mode is selected.
 Troubleshooting: If you are not receiving a picture, please ensure that the RCA cable is
connected to 'OUTPUT' RCA ports on your TV.
If your TV does not have 'OUTPUT' RCA ports, please use an alternative connection method.

Using the HDMI Input

 You will need a TV/audio source with an HDMI High De nition Multimedia Interface, plus an
HDMI cable (not included).
Connect the HDMI cable from the HDMI input on the soundbar (Back View Ref.7 or 8), to the HDMI output on
your TV (for help on how to locate your TV's HDMI output, refer to your TV's user manual).
Press the 'INPUT' button on the remote control (Remote Control Ref.10) or the 'SOURCE/MODE' button on the
top of the soundbar (Front and Top View Ref.5) until 'HDMI1 OR HDMI2' mode is selected. The display will
show 'HDMI1 or HDMI2' (Front and Top View Ref.1).
Using the native controls on your connected device, ensure the audio settings are set to HDMI Audio.
Using the HDMI ARC Output
 You will need a TV/audio source with an HDMI ARC High De nition Multimedia Interface, plus an
HDMI cable (not included).