Troubleshooting - MAJORITY Teton Plus User Manual

Troubleshooting

EN
Observation
No power/function
No sound
No sound in Bluetooth mode
Function disturbance
Remote control function issues
No sound when connected and
switched to OPTICAL IN mode
18
Potential Cause/Solution
Check that the power is switched on at the wall.
Check that the power adaptor is properly connected
to the power outlet.
Check whether the unit is set to MUTE.
Check that cables are properly installed. If cables
are properly installed, please try connecting to your
TV using an alternative cable.
Check unit is switched on and in correct mode.
Check that your Bluetooth device is paired.
Check that you have pressed the PAIR button
before pairing.
Check whether external device requires password
"0000".
Switch off and unplug the unit. Leave for 2 minutes
and switch on again.
If a particular mode is causing problems, please try
an alternative connection to your TV such as Optical
or Bluetooth.
Check whether the battery needs replacing, and
replace if necessary.
Check whether there are obstacles blocking the
remote sensor.
Check and ensure the audio setting of the input
source (e.g. TV, games console, DVD player, etc)
is set to PCM mode while using digital connection
(such as Optical, HDMI and COAXIAL).