Table of Contents
Advertisement
Optical Input
EN
Using the Optical Input
Connecting the Majority NAGA60 with an audio source/TV/PC with an Optical Audio
Output using a Digital Optical Audio cable (not included).
1.
Insert one end of the Digital Optical Audio cable to the optical output on the
audio source and the other end to the Optical Input on the Soundbar (Ref.10).
2.
Press the 'POWER' button on the side panel (Ref.3) or on the remote control
(Rem.13) to switch the soundbar on.
3.
Press the 'INPUT' button on the remote control repeatedly (Rem.14) to switch
to Optical Mode or press the 'INPUT' button (Ref.4) repeatedly on the soundbar
to select 'Optical Mode'. The mode displays '
4.
Using the native controls on your connected device, make sure the audio
settings are on and set to PCM or Optical Audio.
Audio from the connected audio source will now be heard through the NAGA 60.
12
Optical Cable
'.
Rear view of unit
Advertisement
Table of Contents
