Using The Optical Input - MAJORITY SNOWDON SNO-BAR-BLK-2 Instruction Manual

Instructions Guide

Using the Optical Input

You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on
the audio source and to the Optical Input on the speaker bar.
Press the POWER button on the side panel (Ref.1) or POWER
button directly on the remote control (Ref.11) to switch on the
unit.
Press the INPUT button on the remote control repeatedly
(Ref.21) to switch to Optical mode or press the SOURCE button
(Ref.2) repeatedly on the soundbar to select the Optical mode.
The mode indicator LED will turn Yellow.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On.
Audio from the connected audio source will now be played
through the speakers.
OPTICAL IN DC 18V
DC 15V
10