Table of Contents
Advertisement
These instructions must be followed to ensure proper installation and operation of your lift.
Failure to comply with these instructions can result in serious bodily harm and void product
warranty. Manufacturer will assume no liability for loss or damage of any kind, expressed or
implied resulting from improper installation or use of this product.
Required Tools
·
Scissors
·
Phillips Screwdriver
·
10mm Wrench or Socket
·
Needle Nose Pilers
·
Gloves
Cardboard Package weight is approximately 12 lbs. The package size is 51"L x 2.4"W x 2.4"H.
Package can be easily carried by hand.
Shipping Package
1. Inspect package for any damages.
2. Open cardboard package by first cutting banding, followed by carefully opening package.
3. Carefully remove contents from package using the Exploded View & Parts List on page 9 to ensure
all items are included.
Floor Rail Kit Assembly
1. Ensure the Tilt Lift is assembled and fully lowered.
2. Using some form of protection, carefully flip the Lift over onto it's topside. Layout Floor Rail parts.
INSTALLATION INSTRUCTIONS
TLX-7000-FLRAILKIT
Aug 2021
6
Advertisement
Table of Contents
