JUKI MO-2000 Series Service Manual page 75

Adjustment Procedure
Checking items:
❶ Throat plate
❷ Cloth plate, rear cover
❸ Cloth plate, front cover
* Check to make sure that the clearances between throat plate ❶ and
cloth plate front cover ❸ are 0 to 0.5 mm (A) and 0 to 0.8 mm (B).
* Check to make sure that the clearances between cloth plate rear
cover ❷ and cloth plate front cover ❸ is 0 to 1 mm (C).
How to perform adjustment:
○ Loosen the setscrews (E) of the cloth plate hinge (D).
○ Move cloth plate front cover ❸ to the correct position using the cloth
plate hinge (D).
Secure the safety switch cable in the hole (F) with a binding band.
○ Retighten the setscrews (E).
Results of Improper Adjustment
○ If there is no clearance between
○ Assemble the cloth plate com-
71
– –
the cloth plate and the throat
plate and between the cloth
plate and the rear cover, ab-
normal noise can be produced
during operation.
ponents while preventing the
safety switch cable from being
bent forcibly.