JUKI MO-2404 Instruction Book

8E240430tsoA
N o . 0 4
MODEL MO.24O4
l . N E E D L E O V E R E D G E R
MODEL MO-241 4
2 . N E E D L E O V E R E D G E R
MODEL MO -241 6
S A F E T Y S T I T C H E R
InsrnucTtoN
Congratulations on' your purchase of JUKI
MO-2400 Series machines.
Please read this Instruction Book carefully before
using these units in order to get the most out of
them and to enjoy using them for a long time.
[For ttre first one month or so, operate the I
lmachine at about 80% speed of its max. I
[sewing speed.
J
B E F O R E O P E R ATION
Cloth plate cover
1. Do not hold the cloth plate cover when carrying the
machine.
3. Apply two or three drops of oil to the needle bar guide and upper
looper guide when operating the machine for the first time after setup
or after a long period of disuse.
A"iewed
from toP)
oir sause
sz
f&
2. lf the red color is'not seen when you look down or
sideward at the oil gauge, supply oil in accordance with
"6. Lubrication".
R u n n i n g d i r e c t i o n
4. The correct machine running direction
is such that the handwheel turns clock-
wise as viewed from the handwheel's
side. Never run the machine in the
reverse direction.
C AU T I O N S I N OPER ATIO N
1. Do not put your hand under the
needle whijn you turn on the
power switch.
4. Never bring your fingers or hair close to, or place anything
on the handwheel, V-belt, bobbin winder wheel or motor
during operation. lt may lead to serious personal injuries.
5. lf your machine is provided with a belt cover, finger guard
and eye guard, never operate your machine with any of
them removed.
2. Do not put your hand into the
face plate section while the
machine is running.
3. Be sure to turn off the power
switch before you remove the V
belt.
- l -