Siemens SCALANCE XR-500 Operating Instructions Manual page 90
Simatic net industrial ethernet switches
Hide thumbs
Also See for SCALANCE XR-500:
- Configuration manual (832 pages) ,
- Operating instructions manual (112 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Troubleshooting
8.3 Load a firmware file via TFTP.
6. Assign an IP address to the device using DHCP or SINEC PNI.
7. In a Windows command prompt, go to the directory where the file with the new firmware is
located and use the following command:
tftp -i <IP address> put <firmware file>.
Note
You can enable TFTP in Microsoft Windows as follows:
"Control Panel" > "Programs and Features" > "Turn Windows features on or off" > "TFTP Client".
Once the firmware has been transferred completely to the device and validated, the device
restarts. This may take a few minutes.
90
Operating Instructions, 07/2023, C79000-G8976-C692-01
SCALANCE XR-500
Advertisement
Table of Contents
