Scalance Xr524-8Wg; 24 V Ac/Dc Device Versions - Siemens SCALANCE XR-500 Operating Instructions Manual

Technical specifications
Conformal coating of the PCBs
Design of the mounting bracket for four-point mounting
Dimensions (W x H x D)
Plate thickness
Bending radii
Surface of the housing
Mean time between failure (MTBF)
MTBF (EN/IEC 61709; 40 °C)
Wiring rules
1)
Note the wiring rules (Page 65).
Ambient temperature with SFP
2)
The maximum ambient temperature during operation depends on the operating elevation
and the installed plug-in transceivers, see also the section "SFP plug-in transceiver (Page 36)"
in the "Accessories" section.
Restriction when operating with plug-in transceivers of this type
3)
No more than two plug-in transceivers of this type may be used in each of the 4 x SFP as well
as 8 x SFP+ slots.
Derating
4)
The derating values depend on the maximum ambient temperatures during operation up to
2000 m.
5) Degree of protection
The IP20 degree of protection was not examined in the context of UL certification.
9.3

SCALANCE XR524-8WG

9.3.1 24 V AC/DC device versions
The following technical specifications apply to the 24 V AC/DC versions of the SCALANCE
XR524-8WG.
Technical specifications
Connection to Industrial Ethernet
Electrical connectors
SCALANCE XR-500
Operating Instructions, 07/2023, C79000-G8976-C692-01
No
43.6 x 43.6 x 18.3 mm (1 height unit)
1.5 mm
1.5 mm
Stainless steel X6CR17
6GK5534-3TR00-3AR3
6GK5534-3TR00-4AR3
Quantity
Connector
Transmission speed
Properties
9.3 SCALANCE XR524-8WG
> 8.6 years
> 10.6 years
24
RJ45 jack
10 / 100 / 1000 Mbps
Half/full duplex, MDI‑X pinning
Technical specifications
103