Dell EMC DSS 9630 Manual page 38

Table 30. SATA Settings
Option
Embedded SATA
Security Freeze Lock
Write Cache
Port A
Port B
Port C
Port D
Port E
38 Installation and Service Manual
Pre-operating system management applications
Description
Enables the embedded SATA option to be set to AHCI, or RAID modes. This option is set
to AHCI by default.
Sends Security Freeze Lock command to the embedded SATA drives during POST. This
option is applicable only for ATA and AHCI mode.
Enables or disables the command for the embedded SATA drives during POST.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.