Table of Contents
Advertisement
Table 58. Assembly material
Description
#6-32 screw
5
Align the PCIe card with the riser bracket and the riser board connector.
6
Insert the PCIe card in the connector on the riser board.
7
Secure the PCIe card with the provided screw.
NOTE:
You must install an expansion card filler cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
172
Installation and Service Manual
Installing and removing server components
Quantity
2
Torque (lbs/inch)
6 ± 0.2
Advertisement
Table of Contents
