Table of Contents
Advertisement
Table 52. Assembly material
Description
#6-32 screw
3
Flip over the SATA M.2 assembly.
4
Align the M.2 SSD board with the protrusion in the SATA M.2 card.
5
Insert the M.2 SSD until it is fully seated in the connector.
6
Lower the M.2 SSD board and hold it in place.
7
Secure the M.2 SSD board to the SATA M.2 card with the captive screw.
Figure 71. Installing the M.2 SSD board
8
Align the bridge board in the SATA M.2 card connector.
9
Install the bridge board.
140
Installation and Service Manual
Installing and removing server components
Quantity
3
Torque (lbs/inch)
6 ± 0.2
Advertisement
Table of Contents
