Overview; Numaker-M031Sd Features; Figure 1-1 Numaker-M031Sd Board - Nuvoton NuMaker-M031SD User Manual

1

OVERVIEW

This user manual is aimed to give users a fast introduction to the use of NuMaker-M031SD board.
The NuMaker-M031SD consists of two parts, a M031 platform and an on-board Nu-Link2-Me
debugger and programmer. The NuMaker-M031SD allows users to quickly develop and easily
program and debug application.
The NuMaker-M031SD offers M031SD2AE full pins extension connectors, Arduino UNO compatible
extension connectors and diversified power supply option. It is an easy-to-develop platform for user to
expand the functionality and build the applications. The NuMaker-M031SD also provides an ammeter
connector, allows user to monitor the microcontroller's power consumption during development.
The Nu-Link2-Me is a debugger and programmer that supports on-line programming and debugging
through SWD interface. The on-board 16 Mbit SPI Flash allows it able to off-line programming the
target microcontroller. Nu-Link2-Me provides virtual COM port (VCOM) function to print out messages
on PC. Nu-Link2-Me can be separated from NuMaker-M031SD, allowing user to use as a mass
production programming tool.
1.1

NuMaker-M031SD Features

®

NuMicro M031SD2AE used as main microcontroller with function downward compatible
with:

M031SD2AE

M031LD2AE

M031TD2AE

M031SC2AE

M031LC2AE

M031SD2AE full pins extension connectors

Arduino UNO compatible extension connectors
 Ammeter connector for measuring the microcontroller's power consumption

Fixable board power supply:

External V
Feb. 20, 2019

Figure 1-1 NuMaker-M031SD Board

power connector
DD
Page 6 of 37
NuMaker-M031SD
Rev 1.00