Bsp Firmware Download; Hardware Setup; Figure 3-3 Open Vcom Function; Figure 3-4 Ice Usb Connector - Nuvoton NuMaker-M031SD User Manual

3.3

BSP Firmware Download

Download and unzip the Board Support Package
3.4

Hardware Setup

1. Open the virtual COM (VCOM) function by changing Nu-Link2-Me VCOM Switch No. 1 and 2 to
ON.
2. Connect the ICE USB connector shown in Figure 3-4 to the PC USB port through USB cable.
3. Find the "Nuvoton Virtual COM Port" on the Device Manger as Figure 3-5.
Feb. 20, 2019
(BSP).

Figure 3-3 Open VCOM Function

Figure 3-4 ICE USB Connector

Page 25 of 37
NuMaker-M031SD
Rev 1.00