Bertazzoni PRO304BFGMGIT Installation Manual page 46

MAIN GAS OVEN
MEAT PROBE
The meat probe allows you more control over how your
foods are cooked by automatically disabling the specified
cooking mode when a dish's desired temperature, defined
by the cook, has been reached.
The probe will indicate the internal temperature of the meat
as it cooks.
Programming the meat probe.
1) Insert the food probe in the item to be cooked. For best
results, insert the probe as close as possible to the
center of the item and make sure it is not in contact with
bones or fat. Improper placement of the probe could
shut the oven off too early and result in uncooked food.
With poultry, make sure the probe does not rest in a
cavity.
2) Set function and temperature with the knobs.
3) Use the "<" and ">" buttons to select MEAT PROBE.
4) Press MODE.
5) Press the "<" and ">" buttons to select the desired
cooking temperature and press MODE.
6) Insert the items to be cooked on the oven then connect
the probe jack to the port located in the upper left side of
the oven cavity.
7) The display will show current meat probe temperature as
well as set meat probe temperature.
8) When the temperature selected will be reached a tone
will be heard and the oven automatically switches off.
NOTE
To change settled time restart from point 1.
This function does not stop the cooking
process.
NOTE
Once a time function is settle the other time
functions are not available.
According to the recipe the oven can be
pre-heated before use any time functions.
46