Section 5: Accessories - Grizzly G0971 Owner's Manual

SECTION 5: ACCESSORIES

Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
G5618—Deburring Tool with Two Blades
The quickest tool for smoothing freshly sheared
metal edges. Comes with two blades, one for
steel and aluminum and one for brass and cast
iron.
Figure 71. G5618 Deburring Tool.
order online at
-36-
www.grizzly.com
H5503—Electric Sheet Metal Shear
This electric sheet metal shear features a
110V, 2500 RPM, 3.8 amp motor with a 360 de-
gree adjustable swivel head and variable speed
range from 0 to 2500 SPM. Cuts up to 14 gauge
in mild steel and 18 gauge in stainless, at up to
150 inches per minute.
Figure 72. H5503 Electric Sheet Metal Shear.
T30673—Heavy-Duty Roller Stand
This stand comes with 2" steel ball bearing rollers
that assist with infeed and outfeed support. With
the heavy-duty cast-iron base, this stout roller
stand helps support lumber, piping, and more up
to 2000 pounds! With three holes on the base,
it can even be bolted to the floor for increased
stability. Height can be easily adjusted from 24" to
38", and the stand measures 14" wide.
Figure 73. T30673 Heavy-Duty Roller Stand.
1-800-523-4777
or call
Model G0971 (Mfd. Since 11/23)
⁄ HP,
1
2