Download
Share
Print this page
HPE Aruba AP-ANT-MNT-U Installation Manual
  1. Manuals
  2. Brands
  3. HPE Manuals
  4. Racks & Stands
  5. Aruba AP-ANT-MNT-U
  6. Installation manual
HPE Aruba AP-ANT-MNT-U Installation Manual

HPE Aruba AP-ANT-MNT-U Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
HPE Aruba Networking
AP-ANT-MNT-U Mount Kit
Installation Guide

Advertisement

loading

Related Manuals for HPE Aruba AP-ANT-MNT-U

Summary of Contents for HPE Aruba AP-ANT-MNT-U

  • Page 1 HPE Aruba Networking AP-ANT-MNT-U Mount Kit Installation Guide...
  • Page 2 Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code.

  • Page 3: Package Contents

    Hose clamp, 7.85 in / 20 cm long Customer Supplied Equipment Electric drill with drill bits, wall anchors, #1 Phillips screwdriver, 8 mm Allen wrench, and fastening hardware for wall mount HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide...

  • Page 4: Wall Installation

    1. Use the included M10 x 30 screw to attach the mount arm to the mount bracket. Adjust the mount arm to the desired position. The mount arm can be adjusted +/-45 degrees horizontally. Tighten the screw to a torque of 12 N.m. HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide...
  • Page 5 3. Use another included M10 x 30 screw to attach the mount holder to the mount arm. Tighten the screw to a torque of 12 N.m. Figure 3 Attaching Mount Holder to Mount Arm HPE Aruba Networking AP-ANT-MNT-U Mount Kit |...
  • Page 6 M6 x 20 screw into the hole on the mount holder. The antenna can be adjusted +/-45 degrees vertically. Tighten the screws to a torque of 2.5 N.m. HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide...
  • Page 7 Figure 6 Attaching Antenna Holder to Mount Holder (Directional Antenna) Figure 7 Attaching Antenna Holder to Mount Holder (Omni Antenna) HPE Aruba Networking AP-ANT-MNT-U Mount Kit |...
  • Page 8 Arrow mark for antenna horizontal adjustment (in 5-degree increments) Degree marks for antenna horizontal adjustment (in 5-degree increments) 6. Use the included cable tie to fasten the cables to the mount kit. HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide...

  • Page 9: Chapter 3 Pole Installation

    1. Attach the mount bracket to the pole with the hose clamps. Figure 9 Attaching Mount Bracket to a Pole 2. Repeat Installing Antenna to Mount Bracket on page 2 to complete the antenna installation. HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide...