Advertisement
Quick Links
AP-505H-MNT2 Mount Kit
Installation Guide
The AP-505H-MNT2 is designed to secure 505H Series access points to a dual-gang wall box according to the
installation procedure provided in this guide.
A #1 Phillips and T8H screwdriver are required for installation.
Package Contents
Double gang wall mount bracket
Side cover
(x4) #6-32x1 Phillips drive screws
(x2) M2.5 x 6.5 T8H Security Type Tamper Proof Torx screw
Installation
This mount kit supports dual gang wall boxes for the 505H Series access points.
1. If the wall box is not already exposed, unscrew and remove the existing wall plate, as shown in
Figure 1
2. If needed, detach any RJ45 cables by unclipping the connectors from the wall plate.
3. Align the screw holes on the mounting bracket with the corresponding holes on the wall box.
0512198-01 | May 2020
Remove Existing Wall Plate
Figure
1.
1
Advertisement
Related Manuals for HPE AP-505H-MNT2
Summary of Contents for HPE AP-505H-MNT2
- Page 1 AP-505H-MNT2 Mount Kit Installation Guide The AP-505H-MNT2 is designed to secure 505H Series access points to a dual-gang wall box according to the installation procedure provided in this guide. A #1 Phillips and T8H screwdriver are required for installation. Package Contents Double gang wall mount bracket ...
- Page 2 Secure AP-505H to Wall Mount Figure 3 7. (Optional) If the access point requires a DC power adapter, insert a power cable into the socket located on the side of the access point, as shown in Figure AP-505H-MNT2 Mount Kit | Installation Guide...
- Page 3 Figure 4 Plug In Power Cable 8. Place side cover on the assemble and screw in the security screw, as shown in Figure Figure 5 Attach Front Cover and Screw In Security Screw | Installation Guide AP-505H-MNT2 Mount Kit...