Advertisement
Chapter 3
Pole Installation
Pole Installation
To mount an antenna to a pole with diameter of 1.5-2.5" or 3.8-6.35 cm, follow these steps:
Source the desired size of hose clamp directly as appropriate for other pole diameters.
1. Attach the mount bracket to the pole with the hose clamps.
Figure 9 Attaching Mount Bracket to a Pole
2. Repeat
Installing Antenna to Mount Bracket on page 2
to complete the antenna installation.
HPE Aruba Networking AP-ANT-MNT-U Mount Kit | Installation Guide
7
Advertisement
