Cleaning And Maintenance - EuroLite LED TMH FE-600 Beam/Flower Effect User Manual

30 54 1E 36 12% 21%
55 79 37 4F 22% 31%
80 104 50 68 31% 41%
105 129 69 81 41% 51%
130 154 82 9A 51% 60%
155 174 9B AE 61% 68%
175 179 AF B3 69% 70%
180 184 B4 B8 71% 72%
185 189 B9 BD 73% 74%
190 194 BE C2 75% 76%
195 199 C3 C7 76% 78%
200 204 C8 CC 78% 80%
205 209 CD D1 80% 82%
210 210 D2 D2 82% 82%
211 255 D3 FF 83% 100%
0 79 00 4F
15
80 99 50 63 31% 39%
100 255 64 FF 39% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
S
S
S
S
S
S
S
S
S
S
S
S
S
S
F
0% 31% S
S
S
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Green
Blue
White
Color preset 1
Color preset 2
Color preset 3
Color preset 4
Color preset 5
Color preset 6
Color preset 7
Color preset 8
Color preset 9
Color preset 10
No function
Color fade
Reset
No function
Reset all motors
No function
31/32 00094034.DOC, Version 1.0