Advertisement
HTEPE.DET10 system consists of:
– Pump unit
– Hydraulic head type RHTEPE-S16
– Plunger type OG10.5C (qty 2)
– GO / NO GO gauge type CAL135.145
– Adaptor M9M8
– Plastic case VAL-P14
– Application range: suitable for installing rail web electrical connection system into rail web
– Installation force:.........................................................................................................................55 kN
– Rated operating pressure: .......................................................................................................700 bar (10000 psi)
– Flexible hose: length ..................................................................................................................900mm
– Dimensions (pump body):
length ..........................................................................................................................................285 mm
width ...........................................................................................................................................130 mm
– Dimensions (head):
length ..........................................................................................................................................133 mm
width ...........................................................................................................................................67,5 mm
diameter .....................................................................................................................................48 mm
– Weight: .............................................................................................................................................3,8 kg
– Recommended oil: .............................................................. ENI ARNICA ISO32
– Safety: the tool is provided with a maximum pressure valve.
2.1) Setting
Connect the male coupler of the head to the female coupler on the tool hose; ensure that the couplers
are securely fi tted.
Before connecting or disconnecting the head and the hose, ensure that the ram of the head is
fully retracted.
3
1. GENERAL CHARACTERISTICS
thickness 19-20 mm (e.j. BS113A, BS95RBH) and hole diameter 13,5 mm.
2. INSTRUCTIONS FOR USE
or equivalent
Advertisement
