Addi-Data ADDICOM APCI-7800 Technical Description page 25

APCI-7800
IMPORTANT!
i
The configuration is only set once you activated it with OK and confirm
through "Set" and then "Save" in the main window of ADDIREG.
ADDIDriver Board Manager (for ADDIPACK boards only)
Under Edit/ADDIDriver Board Manager you can check or change the
current settings of the board set through the ADDEVICE Manager.
ADDevice Manager starts and displays a list of all resources available for
the virtual board.
Save:
Saves the parameters and registers the board.
Restore:
Reactivates the previous parameters and registration.
Test registration:
Controls if there is a conflict between the board and other devices installed
in the PC. A message indicates the parameter which has generated the
conflict. If no conflict has occurred, "Test of device registration OK" is
displayed.
Deinstall registration:
Deinstalls the registrations of all boards listed in the table and deletes the
entries of the boards in the Windows Registry.
Print registration:
Prints the registration parameter on your standard printer.
Quit:
Ends the ADDIREG program.
Software
25