Clarion CRX97R Owner's Manual page 9

is pressed pressed
3. After PTY selection, press the PTY button
). The PTY broadcast wait state will then
become operative.
PTY Storage, Calling and Checking Method
1. After carrying out PTY selection, press a
Preset button @ for more than 2 seconds.
(6 settings can be stored.)
2. When the PTY display blinks, the storage
process is complete.
3. To call up a stored setting, press the PTY
button for more than 2 seconds, then press
the desired Preset button @9.
* If you press the PTY button for more than
seconds, the PTY select mode will be set,
so be careful.
TA (Traffic Announcement) Button == 6)
When traffic information begins, this is given
top listening priority.
When you press the TA button, the "TA" in-
dicator @ lights up, and a traffic information
station is sought. If such a station is found,
the "TP" indicator @ lights up, and the traffic
information wait state becomes operative.
When you press the TA button again, this
state is released.
If you press the TA button while listening to
traffic information, the traffic information
broadcast is cancelled and the traffic informa-
tion wait state becomes operative again.
If no traffic information station is found, "NO
TRA" is displayed, so you then press the TA
button to release the state. Traffic information
is automatically reproduced at the preset
volume.
1. When the traffic information begins, "TRA
INFO" is displayed for about 5 seconds, af-
ter which the PS (Programme Service
Name) or frequency is displayed. Also, if
the traffic information begins while the
clock (CT: Clock Time and Date) is being
displayed, the clock display reappears after
the "TRA INFO" display.
2. While you are listening to traffic informa-
tion, loudness is turned OFF.
3. The table below shows what happens
when the DISP button @4 is pressed in cer-
tain display states.
4. Even if the "TA" indicator @ is lit, when a
station not broadcasting traffic information
is being received, a traffic information sta-
tion will be sought when you press the TA
button.
5. @ Preset Scan when "TA" Indicator @ is
Lit:
When you press the PS button (0, only
stations broadcasting traffic information
will be covered by the Preset Scan.
e Auto Store when "TA" indicator @ is
Lit:
If you press the AS button 49 for more
than 2 seconds, only stations broadcast-
ing traffic information will be auto
stored.
% Traffic Information and Emergency Broadcast
Volume Setting Method
. Press the TA button for more than 2
seconds.
. Adjust the volume using the buttons @)
and ().
. If you press any button other than @) or @,
and take no other action for 5 seconds, the
previous state will become operative
again.
x Time Display Function (CT: Clock Time and Date)
In areas where CT data is broadcast, the time
can be displayed.
When CT data is received, the "CT" indicator
® lights up.
When you press the DISP button @4, the time
is displayed. If you press this button again or
else press the mode selector button, the ori-
ginal display will reappear.
* Certain countries and certain broadcasting
stations do not broadcast CT data. Also,
depending on the area, the time may be in-
correctly displayed, so be careful.