Advertisement
Available languages
Available languages
5. Slide the control cables through the holes in the
control panel. Make certain the cables are
seated properly in roller guides when hook the
cables to the clutch levers.
Speed Shift Linkage
Remove the knob to slide the shift lever through
the slot in the control panel. Secure shift lever to
the shift arm with screws, washers and nuts.
Replace the knob. Loosen the two bolts on the
gear lever for easier installation.
Discharge Chute
1. Grease underside of discharge chute ring (if
not already greased)
2. Install discharge chute over opening in the
auger housing and secure with fasteners.
3. Secure the upper crank lever bracket
60
Advertisement
