KTM 450 EXC-F 2017 Repair Manual page 240

19
CLUTCH
Check clutch throw-out
(D
for damage and wear.
»
If there is damage or wear:
Change the clutch throw-out.
Pl ace clutch push rod
€)
on a flat surface and check for run-out.
»
If there is run-out:
Change the clutch push rod.
Check spring retainer
8
for damage and wear.
»
If there is damage or wear:
Change the spring retainer .
Check pretension ring
0
for damage and wear.
»
If there is damage or wear:
Change the pretension ring.
Check spring washer
0
for damage and wear.
If there is damage or wear :
Change the spring washer.
Check the contact surface of pressure cap
8
for damage and wear.
If there is damage or wear :
Change the pressure cap .
Check clutch center
41)
for damage and wear.
»
If there is damage or wear:
Change the clutch center.
Check damping rubber pieces
4D
for damage and wear.
»
If there is damage or wear:
Change the damping rubber pieces.
Check inner clut ch hub
41)
for damage and wear.
»
If there is damage or wear:
Change the inner clutch hub .
0 0 231 7- 10
Check the thrust surfaces of the clutch facing discs in clutch basket
Gi)
for damage and wear.
»
If there is damage or wear:
Change the clutch facing discs and the clutch basket.
Check needle bearings
CD
and collar bushing
41)
for damage and wear.
If there is damage or wear :
Change the needle bearings and collar bushing.
238