Subscribe to Our Youtube Channel
Related Manuals for Digitus DN-652101-1
Summary of Contents for Digitus DN-652101-1
- Page 1 DIGITUS Industrial Gigabit Media Converter RJ45 Manual DN-652101-1&DN-652102-1 DN-652103-1&DN-652104-1...
-
Page 2: Table Of Contents
Table of content Introduction ..............2 Features ................. 3 Package Contents ............3 Specifications ..............3 Switch Panel ..............5 Interface Definition ............7 6.1 10/100/1000Base-TX ethernet interface ....7 6.2 1000base-FX ethernet interface ......8 LED Indicator ..............9 Installation caution ............ -
Page 3: Features
2. Features 1. The use of high quality photoelectric integration module to provide good optical and electrical characteristics 2. Ensure reliable data transmission and long working life 3. Support full duplex or half duplex mode, with automatic negotiation capability 4. Network port support automatic cross identification 5. - Page 4 Working: -40～80 °C Work environment Storage: -40～80 °C Bandwidth: 14Gbps Packet Buffer Memory: 1.2Mbit Switch Packet Forwarding Rate: 10.5Mpps MAC Address Table: 2K Input voltage: DC12-48V Input voltage: DC48-57V (DN-652104-1) (two-way power redundancy backup) Power supply Access terminal: Phoenix terminal Support dual power redundancy Support reverse connecting protection.
-
Page 5: Switch Panel
IEC61000-4-6 3V (10kHz-150kHz); 10V (150kHz- (CS): 80MHz) IEC61000-4-16 (Common mode 30V (cont.), 300V (1s) conduction): Frequency 150kHz-80MHz range: Impact: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 5. Switch Panel Side panel: P1 and P2 are the number of connecting terminals, P+1 and P-1 are respectively to the positive and negative poles to be connected;... - Page 6 Front panel: The yellow LED on the RJ45 port is the LINK light, which is on when the connection is established and the data transmission is flashing. The green light on the RJ45 port is PoE light, which is only on when the switch port is supplying power to the PD devices (PoE DN-652104-1 only) Link/Act is green color when optical connection.
-
Page 7: Interface Definition
6. Interface Definition 6.1 10/100/1000Base-TX ethernet interface This series of switches provides MDI/MDI-X self-identification with cable support on all 10/100/1000Base-TX ports. In use, the Ethernet port of the switch can be connected with other Ethernet terminal devices through network cables (direct or cross). -
Page 8: 1000Base-Fx Ethernet Interface
Note: "Tx ±" refers to send data ±, "Rx ±" refers to received data ±, and "-" refers to unused data. 6.2 1000base-FX ethernet interface DN-652101-1: 1000Base multi-mode dual-fiber SC module, 850nm, 2Km cabling. DN-652102-1: 1000Base single-mode dual-fiber SC module, 1310nm, 20Km cabling. -
Page 9: Led Indicator
7. LED Indicator LED indicator Status Definition Power supplying in Red LED on normal Power Power supply abnormal Red LED off or no powering Yellow LED Network connection in normal RJ45 Yellow LED Link communication in flashing normal Link/ Optical link Green LED communication in flashing... -
Page 10: Din Rail Installation
to confirm the range of power supply voltage, as well as the positive and negative poles of the power supply, so as not to damage the equipment by wrong operation. In order to reduce the risk of electric shock, ensure that the equipment is well grounded in the working environment. -
Page 11: Power Connection
8.4 Power Connection Insert the power cord into the specified position of the 6-core terminal and insert the terminal into the standard power supply inlet (P+1 and P-1 input corresponding to the first power supply P1, and P+2 and P-2 input corresponding to the second power supply P2).
Need help?
Do you have a question about the DN-652101-1 and is the answer not in the manual?
Questions and answers