Smart Diagnosis; Factory Data Reset; Demo Mode - LG WSED7667M Owner's Manual

global_main.book.book Page 23 Wednesday, February 8, 2023 4:52 PM
or too cold, you can adjust the oven temperature
yourself.
NOTE
• To begin, either raise or lower the temperature
19 ℃. Try the oven with the new setting. If the
oven still needs adjustment, raise or lower the
temperature again, using the first adjustment as
a gauge. For example, if the adjustment was too
much, raise or lower the temperature 5 ℃. If the
adjustment was not enough, raise or lower the
temperature 12 ℃. Proceed in this way until the
oven is adjusted to your satisfaction.
Adjusting the Temperature
1
Press Settings at the right bottom of the Main
Menu screen, swipe the screen, then press
Temperature Adjustment.
2
Press J or K to raise or lower the
temperature in 1-degree increments. Press
and hold or to scroll up or down the scale.
J K
3
When the desired change appears above the
range, press .
!

Smart Diagnosis™

TM
Smart Diagnosis can be run through a
smartphone application or by calling for support.
Place your smartphone's mouthpiece near the top
left corner of the screen. See "Smart Diagnosis
Function" in the Smart Functions section for
detailed instructions.
1
Press Settings at the right bottom of the Main
screen, swipe the screen, then press Smart
TM
Diagnosis .
2
Press START to start the diagnostic tone.

Factory Data Reset

This function returns all settings to the factory
defaults.
CAUTION
• All stored data will be deleted.
1
Press Settings at the right bottom of the Main
screen, swipe the screen, then press Factory
Data Reset.
2
If you want to reset data to the factory defaults,
press RESET. A popup will appear in the
display, then press RESET.

Demo Mode

Demo Mode for showroom use only. The oven will
not heat up.
1
Press Settings at the right bottom of the Main
screen, swipe the screen, then press Volume.
2
Tap the upper right corner of the screen 15
times to enable or disable demo mode.
OPERATION
23