LG WSED7667M Owner's Manual page 42

global_main.book.book Page 42 Wednesday, February 8, 2023 4:52 PM
OPERATION
42
Using the Meat Probe Feature
CAUTION
• Always use an oven mitt to remove the
temperature probe. Do NOT touch the grilling
element. Failure to follow this warning can result
in severe personal injury.
• To avoid damage to the meat probe, do not use
tongs to pull on the probe when removing it.
• Do not store the meat probe in the oven.
1
Insert the probe into the food.
NOTE
• To avoid breaking the probe, make sure food is
completely defrosted before inserting the probe.
2
Open the flap upwards and connect the probe
to the jack in the oven. Probe connected
appears in the display and the probe icon
appears at the top of the display.
Probe icon
3
Select a desired cooking mode. The probe can
be used with Hot Air, Top Bottom Heat and
Roasting modes.
4
Press Temp. to set the desired cooking
temperature. Press
J
the numbers, then press
settings.
You can also use the number pad icon to set
the cooking temperature directly, then press
OK.
• The default probe temperature is 65 ℃, but
can be changed to any temperature
between 30 ℃ and 99 ℃.
Number pad icon
5
If desired, press Time to set the cooking end
time.
or to raise or lower
K
! to save the
Press J or K to raise or lower the numbers,
then press ! to save the settings.
You can also use the number pad icon to set
the cooking time directly, then press OK.
6
Press the Start/Stop button on the control
panel. If a delayed start time has been set, the
start time appears in the display.
7
When the set probe temperature is reached,
the oven shuts off automatically.
NOTE
• See the Recommended Probe Temperature
Chart to set the probe temperature.
Changing the Probe Temperature
while Cooking
1
Press Edit in the display to bring up the Cook
Settings screen.
2
Adjust the settings as desired.
3
Press the Start/Stop button on the control
panel.
To Stop Cooking
Press the Start/Stop button on the control panel,
then press Stop in the display.
NOTE
• Press the Start/Stop button on the control panel
at any time to cancel a cooking operation.
• While the meat probe mode is running,
EasyClean does not respond.