Custom Audio Electronics PLUS2 User Manual page 54

Printhead
1
Disconnect the power supply cable and Disconnect the power supply cable and
open the device cover (see
open the device cover (see par. 4.1).
2
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Clean the printhead by using
a non-abrasive cloth moistened with isopropyl.
54
paragraph 5.1).
Platen roller
1
Disconnect the power supply cable and Disconnect the power supply cable and
open the device cover (see
open the device cover (see par. 4.1).
2
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Clean the platen roller by using
a non-abrasive cloth moistened with isopropyl.
paragraph 5.1).