Table of Contents
Advertisement
8.12 Front handle
8.12.1 To remove and install the front handle
1. Remove the hoses from the water valve. Refer to
Product overview on page 15 .
2. Remove the screws for the handle and the ground
support.
3. Remove the wear protection and the screws for the
ground support.
34 - Repair instructions
4. Remove the front handle.
5. Assemble in the opposite sequence.
8.13 Wet system
8.13.1 Function
Each side of the blade guard has a spray nozzle.
The water hits a section of the cutting blade and the
centrifugal force moves it out to the edge.
1597 - 003 - 05.07.2023
Advertisement
Table of Contents
