Husqvarna K 1 PACE Workshop Manual page 22

LED in- Indication
dicator
5 The indicator is
on.
The indicator is
on and the RA
11 is installed.
The indicator is
on and the RA
11 has been in-
stalled on the
left and the right
side.
22 - Troubleshooting
Cause
The RA 11 is not installed on the
product.
One clamp switch is damaged on
one side.
The two clamp switches are dam-
aged.
Solution
Install the RA 11 on the product. Make sure that
the RA 11 is correctly installed and tightened to the
product.
Install the RA 11 on the other side.
Speak to an approved Husqvarna service center.
1597 - 003 - 05.07.2023