8.2 Control unit
8.2.1 To remove and install the control unit
CAUTION: If you replace the control unit,
download the software to it with CST/HSH.
1. Remove the left handle half. Refer to
disassemble and assemble the handle half on page
24 .
2. Remove the rubber cover.
3. Remove the cable connectors.
1597 - 003 - 05.07.2023
4. Remove the screw that holds the control unit.
To
5. Push in the locking clip and remove the wiring
assembly.
6. Remove the control unit.
7. Assemble in the opposite sequence.
Repair instructions - 25