Table of Contents
Advertisement
5-10
Slider function [PART VOLUME]/[EL/OP/OSC LEVEL] button
Use this button to set the eight control sliders for controlling the volume of the Parts or the level of the elements,
operators, oscillators, or drum keys. Each time you press the button, the slider function alternates between PART
VOLUME and EL/OP/OSC LEVEL.
5-11
Control sliders 1–8
Use these sliders for real-time control of the volume for Parts 1–16 (1–8/9–16), elements of Normal Parts (AWM2),
operators of Normal Parts (FM-X), oscillators of Normal Parts (AN-X), and keys for the Drum Parts.
When the slider function [PART VOLUME]/[EL/OP/OSC LEVEL] button is set to "EL/OP/OSC LEVEL," you can use the PART
buttons to adjust the levels for the element, operator, oscillator, or drum key of the selected part.
NOTE
• If all Control Sliders are set to the minimum, you may not hear any sound from the instrument, even when playing the keyboard or
a Song. If this is the case, move all the sliders to a suitable level.
• The [MASTER VOLUME] knob controls the overall audio output level of this instrument. On the other hand, the Control Sliders
control the level of each element/key/operator of the Parts and the volume for each Part of the Performance as a parameter.
Accordingly, the values set via the Control Sliders can be stored as Performance data.
5-12
Part group [1-8/9-16]/[USB AUDIO / A/D INPUT] button
Use this button to set the PART buttons for selecting Parts 1 to 16 or for selecting USB AUDIO and A/D INPUT. Each time
you press the button, the sliders' function alternates between 1–8/9–16 and USB AUDIO/ A/D INPUT.
By pressing this button while holding down the [SHIFT] button, you can use the PART buttons to control Parts 9 to 16.
When the 1-8/9-16 lamp is on, the PART buttons are set to Parts 1 to 8, and when the 1-8/9-16 lamp is flashing, the PART
buttons are set to Parts 9 to 16.
5-13
PART buttons (EL/OP/OSC)
When the Part group [1-8/9-16]/[USB AUDIO / A/D INPUT] button is set to "1-8/9-16," you can use these buttons to
select Parts 1 to 8 or Parts 9 to 16.
When the Part group [1-8/9-16]/[USB AUDIO / A/D INPUT] button is set to "USB AUDIO / A/D INPUT," you can use these
buttons to select DIGITAL IN, USB MAIN, USB ASSIGN, and A/D INPUT.
By pressing one of these buttons while holding down the [SHIFT] button, you can use the appropriate PART button to
select Elements 1 to 8, Operators 1 to 8, Oscillators 1 to 3, or Noise.
20
MONTAGE M Quick Guide
Advertisement
Table of Contents
