Unigas HTLX92R Installation Manual page 5

GENERAL FEATURES
This series of industrial burners is designed for all those applications that require big-sized air fans or air-flue heat exchangers to be
installed in sound-proof areas to reduce noise. They can be provided with built-in or separate-mounted control panel (console or wall-
mounted).
Gas train
Electric panel
Note: the picture shows one of the possible installations. Fan, electrical panel and pumping unit can be placed according to the custo-
mer needs.
How to choose the burner
To check if the burner is suitable for the boiler to which it must be installled, the following parameters are needed:
fuel

furnace input, in kW or kcal/h (kW = kcal/h / 860);

boiler type;

combustione head type (reverse flame or three phase)'

temperature or pressure of the thermal carrier fluid

Comburent air temperature

Air duct positioning

Pressure in the combustion chamber

Elevation (altitude) of burner installation

Gas train (only for gas burners)

Pumping unit (only for light-oil or heavy-oil burners)

Air fan

Bilt-in or separated control panel

backpressure (data are available on the boiler's ID plate or in the user's manual).

Burners provided with built-in control panel are designed for IP40 index of protection. For other values of IP, please contact the CIB
UNIGAS Technical Dpt.
PART I: INSTALLATION MANUAL
Burner
Pumping unit
Fan
5
PART I: INSTALLATION MANUAL