Getting To Know Your Monitor; Key Details - Angelcare AC25 User Manual

HOW THE SENSOR PAD WORKS
Once your sensor pad has been placed under the matress and you have completed your
four corner test the unit should be ready to use. The clever sensor pad technology will track
the baby's movements across the whole surface of the matress. If after 15 seconds baby's
movement become untrackable a small beep will alarm to rouse baby to move, if the lack of
movements continue for a further 5 seconds an alarm and warning will sound on your Parent
Unit, meaning you should urgently check on your baby.

GETTING TO KNOW YOUR MONITOR

Nursery Unit
1. Night light
2. Camera
3. Power LED (Green)
4. PAUSE / PAIRING
5. POWER ON/OFF
6. Microphone
7. Rotary stand

Key details

1. Night Light (white glow)
- This is managed by a
setting on the Parent
Unit.
- If the temperature
colour alert setting on
the Parent Unit is on,
the Nursery Unit will
glow Blue (too cold) or
red (too hot).
AC25_BabyMovementMonitor_Manual_Final.indd 5 AC25_BabyMovementMonitor_Manual_Final.indd 5
8. Infrared LEDs x 6pcs.
9. Light sensor
10. NIGHT LIGHT ON/OFF
FRONT VIEW
3. Power LED
- This will glow green
to indicate the Nursery
Unit is on.
4. Pause/Pairing Button
- PAUSE mode-Press
pause key to pause
sensor pad movement
detection. Press again
to un-pause. During
PAUSE mode, Power
LED is blinking slowly.
10. Temperature
sensor
11. Speaker
12. USB type-C
power port
REAR VIEW
5. Power On/Off
- Hold this button for 5
seconds to turn the
unit on or off.
10. Night Light Button
- You can turn the night
light on and off with
this button (there is
also a setting feature
on the Parent Unit)
ANGELCARE – Model AC25
2023-07-12 13:47 2023-07-12 13:47
| 5