Nikon ECLIPSE E400 POL Instructions Manual page 39

5. Troubleshooting Tables
B Electrical system
Problem Cause
Countermeasure
The lamp does not light
when the power switch is
turned on.
The power is not being supplied.
Plug the power cord into an outlet. (p.32)
The power cord is not connected to the
й 2
тысы Connect the power cord. (p.32)
The lamp has not been installed. Install the lamp. (p.30)
The lamp is burned ош Replace the lamp. (p.30)
The specified lamp is not being used.
Use the specified lamp (refer to the
the brightness is unstable.
electrical specifications on p.39). (p.30)
The lamp is near the end of its life. Replace the lamp. (p.30)
The lamp flickers; The power cord is not connected securely. | Secure the connection. (p.32)
'The lamp is not plugged into its socket
securely
Insert the lamp securely into its socket.
(p.30)
37