Fm Operation - MAJORITY Robinson 2IR Instruction Manual

Instructions Guide

FM Operation

To switch the unit to FM mode, press MODE button on remote control to access
Mode Menu. Press 7 / 8 button to select and press
SELECT button to switch to "FM radio" mode.
Alternatively, press FM button on remote to switch to
FM mode.
The display will show the frequency.
Auto Scan
Press SCAN button on remote control to activate auto scan.
Alternatively,
Press and hold the 7 / 8 buttons to start searching for a staion backwards
-
or forwards. Once a station has been found, the scanning will stop
automatically.
The search may not stop at a station with a very weak signal
Manual Tuning
To search for FM stations manually, press the 7 / 8 buttons repeatedly until
your desired frequency is reached.
With FM radio, it may be necessary to ne tune each station by pressing
/ buttons repeatedly. Each press will adjust the frequency by 0.05
MHz. If reception is still poor, adjust the position of the aerial or try
moving the radio to another location.
FM Display Modes
Every time you press the INFO button, the display will show the following display
modes: Radio Text – Programme Type – Frequency – Date
26
EN