Network Connection; Getting Started - MAJORITY Robinson 2IR Instruction Manual

Instructions Guide

Network Connection

This product only supports wireless network connection for networking access
and does not support wired LAN Connection.
Wireless network
1. Check rst of all whether the control lamps (LINK/ACT) of your router light
up.
2. Proceed with the operations described in the below "Getting Started". It
is recommended to run through the setup wizard in the System Settings
section.
This unit cannot be connected to a standalone modem directly. A router
or a modem connected to a router has to be used.
Since there are various connection congurations, please follow the
specications and instructions of your telecommunication carrier, Internet
service provider, and router setting guidebook.

Getting Started

This instruction manual explains the basic instruction for operating this
unit. Unless otherwise stated, all operations described are based on
remote control use.
Powering ON/OFF
1. Press the q button on unit or remote control to switch the unit on.
2. Press the q button on unit or remote control to switch the unit back to
standby.
8
EN