Sears PRO-FORM 630DS User Manual page 17

_] Follow your progreSS with the LED track and
the four displays.
See step 5 on page 10.
_1_ Measure your pulse, if desired.
See step 6 on page 11.
iill When the program is finished, remove the
_key.
Step onto the foot roils and remove the key from
the console. Keep the key in a secure place. Note:
If the displays and various indicators on the
console remain lit after the key is removed, the
console is in the "demo" mode. Refer to page
14 and turn off the demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.
THEINFORMA_ON MODE
The console features an Information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total n,.umberof,miles_at:_e
walldna belt has moved._Th_,iofo_ m_d_._-
allows you to,switch'the consotg-f.r0mmttes_eT_-_-W-to-
kilometers per hour.
To select the information mode, hold down the STOP
button-while Inseltlng thekey:lnto'the console. Wl)en
the Information mode Is selecto e d, the fo!lowf.ng in_tr_a-
tion will be shown:
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
The TIMFJINCLiNE display
will show the total number of
hours the treadmill has been
used.
TIME INCLINE
I
An "E," for english miles, or an
"M," for metric kilometers, will
appear in the SPEED/MIN-
MILE display. Press the
SPEED A button to change
the unit of measurement.
IMPORTANT: The CALO-
RIES/FAT CALORIES/
PULSE display should be
blank. If a =d" appears in the
display, the console is in the
"demo" mode. This mode is
intended to be used only
when a treadmdl is displayed
m a store. When the console
is in the demo mode, the
power cord can be plugged
in, the key can be removed
from the console, and the d=s-
plays and indicators on the
EKG2 PuLs_
CALORIES FAT CALORIES
EKG;= P, x s_
P-,ALOR}ES FAT CALORIES
console will automatically hght in a preset sequence, al-
though the buttons on the console w=ltnot operate. If a
"d" appears in the CALORIES/FAT CALORIES/
PULSE display when the information mode is se-
lected, press the SPEED _7button so the CALO-
RIES/ FAT CALORIES/PULSE display is blank.
To exit the information mode, remove the key from the
console.
17