Installing And Configuring The Xpci-800X Toolset Software; Scope Of Delivery Of The Xpci-800X Toolset Software; Installing The Miniport (Rnwmc Device Driver); Installing Mcfg - Addi-Data CPCI-8004 Commissioning Manual

12
3 Installing and configuring the xPCI-800x TOOLSET
software
3.1

Scope of delivery of the xPCI-800x TOOLSET software

The xPCI-800x TOOLSET software [TSW] is delivered on a CD. This essentially contains the following parts:
•
INF file with Miniport device driver
•
mcfg utility program
•
fwsetup utility program
•
Command line program
•
Firmware program and files
•
Libraries + programming examples
•
Documentation
3.2

Installing the miniport (rnwmc device driver)

The sub-directory \Inf\WIN_2K_XP_Vista_7 of the xPCI-800x TOOLSET CD contains the file rnwmc.inf.
This file has to be specified as an installation file for the plug&play installation and accordingly in the device
manager. Thus the current hardware driver version will be installed.
For earlier operating systems, the INF file of the respective directory has to be indicated. In addition, the
Miniport driver needs to be installed using ksetup.exe.
3.3

Installing MCFG

Call the setup.exe installation program in the mcfg sub-directory of the xPCI-800x TOOLSET CD. This is an
installation package based on the Microsoft Installer.
3.4

Installing FWSETUP

Call the setup.exe installation program in the fwsetup sub-directory of the xPCI-800x TOOLSET CD. This is
an installation package based on the Microsoft installer.
CM / C M
OMMISSIONING ANUAL