Handling The Board; Important - Addi-Data CPCI-8004 Commissioning Manual

CM / C M
OMMISSIONING
2.6

Handling the board

Please note:
The following procedures must be observed during commissioning:
Installing the xPCI-800x TOOLSET software [section 3] – Installing the board [section 4]
Configuring and wiring the xPCI-800x board [section 5]
Settings and planning as described in section 6 and section [OM / section 4.2].
2.7

Important!

Before installing or removing any modules, ensure that the PC and the external power supplies have been
switched off.
If this instruction is ignored, the board or computer could be destroyed.
The manufacturer shall not be liable for damage which could result from the use or implementation
of its products.
The manufacturer shall not be liable for errors of any type, which may be contained in these
manuals. The manufacturer further reserves the right to alter this manual, and the specifications of
the product described, without having to divulge or announce these alterations in any form to any
person or persons.
ANUAL
Fig. 2.1: How to handle the board correctly
11