Table of Contents
Advertisement
DESCRIPTION:
1
Unit for Time (min)
2
Unit for Centrifugal Force (rcf x 100)
3
Unit for Rotational Speed (rpm x 100)
4
Display
5
LEFT Key
6
UP Key
7
PROGRAM Key
8
DOWN Key
9
RIGHT Key
10
FAST SPIN Key
11
LID Key
12
LID Indicator
13
START Key
14
STOP Key
3.1 KNOB AND KEY FUNCTIONS
By pressing this key, you select operation parameters in the
left direction.
By pressing this key, you increase the set value of selected
operation parameter for one step. By pressing and holding
this key, the value is increasing quickly.
By pressing this key, you can set the programs. LID indicator
starts to blink. Then select new program with UP and DOWN
keys and confirm it by pressing the PROGRAM key. LID
indicator stops blinking. If you want to change the values of
parameters of an existing program, use LEFT and RIGHT keys
for selecting the parameters, and then UP and DOWN keys
for setting of parameters values, when LID indicator is blink-
ing. Confirm new settings by pressing the PROGRAM key. By
pressing the LID key anytime during this procedure, you can
cancel the program setting without saving the new settings.
Advertisement
Table of Contents
