Program Setting - Omni revvity CF-220 User Manual

Changing of run time during the operation:
You should be aware, that when you extend run time, the difference between newly
set and originally set time is added to current time, and when you shorten run time,
the difference is subtracted.
The centrifuge started with time set to 10 minutes. It has been running for
Example:
3 minutes. Then you changed the time to 5 minutes. The centrifuge will run
for another 2 minutes.

3.7 PROGRAM SETTING

You can save 100 programs, with different operational parameters, in the centrifuge
memory.
NOTE:
You can cancel the procedure for program setting by pressing the LID key and return
to standby mode without confirming the data.
If you want to use the existing program, follow the next procedure:
Press the PROGRAM key to enter the setting of programs. LID indicator starts to
blink. Then select new program with UP and DOWN keys and confirm it by pressing
the PROGRAM key. LID indicator stops blinking. Operation parameters of selected
program are set.
If you want to change the existing program, follow the next procedure:
Press the PROGRAM key to enter the setting of programs. LID indicator starts to
blink. Then select the program that you want to change with UP and DOWN keys.
After that, use LEFT and RIGHT keys for selecting the parameters, and then UP and
DOWN keys for setting of parameters values. Confirm new settings by pressing
the PROGRAM key. LID indicator stops blinking. Operation parameters of selected
program are set.