Note:
Values in SETTING column of the above table are factory default values of user's
parameters. Values are informative only, and they depend on inserted rotor and
individual centrifuge.
5.4 REPLACING THE CENTRIFUGE FUSES
CF-220 Centrifuge:
Fuse
Compartment
Mains Socket
The following fuses are required for the CF-220 Centri-
fuge:
2 x 6.3AT 250V (230V)
2 x 10AT 250V (120V)
• Unplug mains plug from the mains socket.
• By pressing the locking device on the bottom side of
the fuse compartment, the fuse holder is released and
you can pull it out.
• Replace fuses.
• Insert fuse holder and push it, until it locks.